1
Share:
ESKA ERG-H7 direct acting gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure.
H7 series is mainly used in distribution of Natural Gas but also suitable for non corrosive gases. Monitor version is also available.
The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.
Direct Acting Regulator
Commercial Natural Gas Regulator
SPECIFICATIONS
- Medium Natural Gas, LPG and Non-Corrosive Gases
- Pressure Class PN16 - ANSI 150
- Maximum inlet pressure 16 bar
- Outlet pressure range 20 mbar to 4 bar
- Flow range/capacity up to 15000 m3/h
- Operating temperature -20... + 60°C (optional : -40... +60°C)
- Connections DN50, DN80, ANSI or EN FLANGED available
- Assembly Horizontal Position
- Fail mode fail to open
DESIGN AND ACCESSORIES
ERG-H7 Series gas pressure regulator body consists of:
Valve housing
- Set up tool
- Breather consol.
- Over pressure shut off OPSO
- Under pressure shut off UPSO
Furthermore the truly “top entry design” allows an easy periodical maintenance without removing body from the line as well as High flow rate coefficient, High accuracy, even at maximum flow rates, Reduced response times.
Inquiry - ESKA ERG-H7 DIRECT ACTING GAS PRESSURE REGULATOR
